- Bug Fixes
- Images that cannot be fetched via URL embedded anyways
- Some form values (URLs, HTML comments) get rejected by web server firewalls (mod_security)
- Verbose Error Logs re: temp mass mailing subscriber file
- Individual Mass Mailing Log should show errors
- references to, "http://dadamailproject.com" needs to be changed to, "https://dadamailproject.com"
- If Global Unsubscribe/Global Black List is enabled, the, "Remove ALL $List_Type" alert box should remind the user
- Internal Changes
- Bundled version of LWP is woefully outdated and should be removed
- Membership: View, Alert Prompt to Delete all Subscribers is strangely worded
- Error, "execute failed: Specified key was too long; max key length is 767 bytes" when attempting to make SQL tables
- Finding the Installer's error log is not obvious
- "TRUNCATE" SQL statement used in installer incompatible with SQLite
- "Freshness" check on messages sent to Bridge
- "Freshness" check for Bounce Handler
- LWP v6 is listed as a requirement for Amazon SES, but v5 is fine
- Add option to remove backups made by installer, in the installer
- Send a Webpage: Content via a URL: no feedback/error thrown if problems were found with the crop
- List Consents can be blank
- "available_lists()" SQL query just isn't specific enough to find the actual lists available
- Send a Webpage errors should be shown in Send a Message screen (or at least in error log)
- Incorrect Profile Login asks if you are registered, even if "Registering" is disabled.
- "Already Subscribed" email notification does not show subscriber email correctly
- Plugin: Tracker: Hard Bounce report sometimes not shown
- Enhanced One-Click Unsubscription support via Email Headers (per RFC 8058)
- New Options to Complete Unsubscriptions
- Fill in the email address, the submit a form
- Bounce Handler Enhancements
- Instagram Support Added
- Send a Message: no error returned if HTML Version uses Send a Webpage, but URL is blank
- Send a Message: Errors in constructing email message don't always show in, "Preview"
- Send a Webpage check needed if, "Do not send an HTML version (only PlainText version)" and, "Create a PlainText version automatically" are both selected
- Drafts/Send a Message UI redesign/shuffle
- New Option: Save Sent Draft Messages as Stationery
- New Ignore Bounces Sublist
- RESTful API Support for Update Profile Fields
- Custom Preheader is not set for Subscription Confirmation Message (and probably others) #736
- UTF-8 characters in email headers of email templates cause server errors #735
- Custom "to_phrase" and, "from_phrase" set in email theme templates aren't always actively used in email messages sent out #734
- "Recent Activity" screen still uses dada.txt log file, rather than, "dada_consent_activity" table #733
- Custom To/From phrases as well as Custom Subject do not get applied correctly #721
Bridge Announcement List and Authorized Senders Enhancements
The Bridge plugin allows you to send messages with Dada Mail through your mail reader without having to log into Dada Mail's own list control panel. You can set up a list of Authorized Senders who are allowed to send to the mailing list. This is an easy way to allow more than just the List Owner the ability to send to your mailing list, without needing to give out your mailing list's administration credentials to anyone else.
We have added several features to allow you to send more effective announce-only messages through Bridge:
Rewrite From: Header Correctly
The first change we've made is actually a bug fix. One way to run your announcement list utilizing Authorized Senders is to rewrite the From: header, so all messages sent to your mailing list use the List Owner in the From: header, no matter what Authorized Sender sent the message.
Look for the radio button labeled,
Rewrite From header to List Owner
Another option available is to preserve the original From: header so that any replies go to that address, rather than the List Onwer. The issue was that the From: header wasn't correctly managed to deal with DMARC restrictions.
Say you have an Authorized Sender that's using a Gmail account, and you've set up your mailing list to send using your own SMTP server. Sending a mass mailing from your own server with (for example) a Gmail address in the From: header won't work. You'll need to instead send the message "on behalf of" the original sender, just like we do for discussion lists. In past versions, this wasn't happening, and in v11.7- it now is. Rejoice!
Look for the radio button labeled,
Rewrite From header to be "on behalf of" List Owner
Don't rewrite the From header for email addresses from certain domains
We've also added an option to list domains that you would not like this rewrite to happen, just in case your mail system has already allowed certain additional domains to be sent through it.
Look for textbox labeled,
Don't rewrite From header for the following domains: (one domain per line)
Set the Reply-To: header
The ability to set the Reply-To header to the List Owner or the original sender (or no one!) has been kept, even though the From: header need to be sent "On Behalf Of".
Mention the original sender
Similar to what you're able to do already for discussion lists, you can now set your mailing list to mention who the original authorized sender was, who sent the message. This option can be enabled (default) and disabled in Bridge for both announce-only and discussion lists. Look for the checkbox labeled:
Mention the original sender of the message at the top of the message itself
Under the hood, this is implemented using Dada Mail's template tags, which you can use too, in your own custom mass mailing layout. See our docs on Dada Mail's email template tag syntax to learn more:
Authorized Senders do not have their addresses re-written in announce-only messages. Open
Moderation is active even if mailing list is announce-only
WhatsApp Number Support
Add your WhatsApp Number! A link to start a WhatsApp chat will appear at the bottom of your email messages, below your physical address and phone number.
Theme being used now displayed in Admin Menu
See which theme is currently applied to your email messages without having to visit the Email Themes screen
Better error reporting in individual mass mailing log
In an effort to more easily debug problems with mass mailings, the individual mass mailing log will show more errors.
Better error reporting for problems with messages received with the Bridge plugin
In an effort to more easily debug problems with messages received via the Bridfge plugin, more information will be printed to the error log, when a problem occurs.
New Safety Checks When Removing All List Members
In Dada Mail, it's very easy to remove all list members from the, Membership: View screen. Although an alert box does come up when you click this button, it's not entirely clear if Global Unsubscribe is enabled for your installation. If it is, removing all your members from one list may remove all your members from all your mailing lists, which most likely is not what you want to do.
To help with this issue, we've disabled this button per mailing list. You can re-enabled it in the, Membership: Options screen. We've also put a alert box on the top of the, Membership: View to remind you if you Global Unsubscribe is enabled. The alert box that comes up if you do try to remove all your members will again remind you that global unsubscribe is enabled.
All the above also applies to the Global Black List, and you'll get similar notifications in the interface if you try to remove any of the blacklisted members, and have the Global Black List enabled.
Images that cannot be fetched via URL embedded anyways
Some form values (URLs, HTML comments) get rejected by web server firewalls (mod_security)
Verbose Error Logs re: temp mass mailing subscriber file
Individual Mass Mailing Log should show errors
references to, "http://dadamailproject.com" needs to be changed to, "https://dadamailproject.com"
Moving Away from MIME::Lite::HTML to MIME::Entity
The largest change in this release is moving away from using the,
MIME::Lite::HTML was an important part of Dada Mail, as it was used to embed images into email messages and was the original engine that turned URL's into email messsages.
MIME::Lite and therefore
MIME::Lite::HTML are known to be a little buggy, and aren't well supported these days, so we've moved to it's larger brother:
MIME::Entity and the rest of the
MIME::Tools collection of modules is already well-entrenched within Dada Mail's codebase. Removing MIME::Lite::HTML also removes a substantial amount of redundant code.
jQuery upgraded from v2.1.4 to v2.2.4
This is mostly a bug-fix release for issues found in the v11.5.0 release of Dada Mail. There a few small features to look out for:
Cleaned up Discussion List Moderation Screen
Dada Mail primarly moderates discussion list messages via an email interface: copies of messages that require moderation are sent to all the Moderators via an email notification. The moderators can then approve or deny a message from being sent.
We've now made it easier to see awaiting messages within the List Control Panel. Under, Plugins/Extensions: Bridge, look under Moderation for a button that will allow you to view the messages awaiting moderation. This button will only be enabled, if Moderation is also enabeled. Clicking this button will take you to a new screen which will list all messages that are awaiting moderation in a table, in descending order by date.
For each message, you will have the ability to approve, deny, or simply delete the message from the moderation queue (no notification will be sent to the subscriber if you choose the latter). You may also re-send the moderation notification to all your moderators, where they may view the message itself.
Easier to see errors during installation
Although it's rare, sometimes the installer doesn't run correctly. When this happens, it's sometimes useful to look into the error log, to see what happened (and report the problems to us!). Finding this error log wsn't very well documented, so we've fixed that problem, and made the installer a little more aggressive on displaying errors in a way that's more easy to work with.
Old backups of directories in dada_mail_support_files directory now removed automatically
Dada Mail's installer makes backups of directories found in the,
dada_mail_support_files directory. The problem is that there's nothign that ever removes these backups, so they start piling up and taking up disk space.
The installer will now remove all but the last three directory backups, per named directory.
Bundled version of LWP is woefully outdated and should be removed
Membership: View, Alert Prompt to Delete all Subscribers is strangely worded
Finding the Installer's error log is not obvious
"TRUNCATE" SQL statement used in installer incompatible with SQLite
"Freshness" check on messages sent to Bridge
"Freshness" check for Bounce Handler
LWP v6 is listed as a requirement for Amazon SES, but v5 is fine
Add option to remove backups made by installer, in the installer
Test sending out your mass mailing is a great idea to do, before you commit to sending out the message to your entire mailing list.
In past versions, Dada Mail could only send only send a test mass mailing to one email address at one time.
Starting with v11.5.0, Dada Mail can send a test mass mailing to multiple addresses at once.
By default, this list of test recipients can be created per draft message by typing in the email addresses in the same text box that previously only supported one email address. By default, up to ten email addresses may be added to this text box, and sent a test mass mailing.
Additionally, a Testers List may be enabled so that the same list of addresses can be sent a test mass mailing for all draft messages. This sublist can be administrated simnilarly to your main Subscribers list.
Here's where to find all these new enhancements:
When drafting a new mass mailing, click on the, Options tab, then click on the, Testing tab. This is where you'll find the text box to list the addresses you would like your test mass mailing to be sent to. By default, you can enter up to ten addresses (read on to find out how to change this default). Separate each address you enter in the text box by commas, spaces, and/or new lines.
When you're ready to send out a test mass mailing, click the button at the top of the screen labeled, Send Test. The screen will refresh to show you the mass mailing monitor for your test mass mailing. A button will be shown at the top of the screen labeled, Return to Editing Draft. Click this button to return to your draft message, so that you can continue editing the message, or to send the mass mailing out for real. (Note: In previous versions of Dada Mail, you would never leave the draft editing screen, as only one email address would be sent the test mass mailing.)
To enable the Testers List, go to Membership: Options in the list control panel. Find the section labeled, Testers List to see the options available to you. Check the option labeled, [x] Activate Testers List to enable the Testers List.
Options below this checkbox will allow you to specifiy if there's a limit to how many addresses you may have in your Testers list as well as what that limit is. The limit set here will also affect how many addresses you can add to the text box in the drafts screen, per draft message.
Once enabled, the Testers list can be accessed in the list control panel under, Membership View. Click the tab labeled, "Testers" to see add/edit/remove addresses in this sublist.
And once enabled, you can toggle between using your Testers list and a unique list of addresses per draft message in the draft message itself. Revisit the Options: Testers tab(s) to now see the two options available. Select, Send to Testers sublist to send your test mass mailing to the Testers.
Sending a test message can be useful in a few different ways. With a test mass mailing, you can make sure that delivery is working to specific addresses, domains, and email services, and that the email message itself is displaying correctly on a spectrum of services and devices. This can also help you get a checkoff of the content an design of your mass mailing if you're working within a team.
There are a few things that happen differently when sending out a test mass mailing. To start, none of the recipients of a test mass mailing will be able to unsubscribe through the test mass mailing. Also, test mass mailings will not be tracked for things like Opens, Clickthroughs, or Bounces.
Error when creating mailing list w/List Consen
Problem fetching URL: "css/app.css" Whenever an email is sent out with a theme's template applied
This is mostly a bug-fix release for issues found in the v11.4.5 release of Dada Mail.
HTML to PlainText subroutine does not properly strip out HTML comments
This is mostly a bug-fix release for issues found in the v11.4.4 release of Dada Mail.
Better error reporting when sending webpages
If problems occur when trying to send a message via the option, "Grab content from a URL" (and then entering a URL), error reporting has now been enhanced both right in the UI, as well as in the error log.
Error reporting has also been enhanced in similar ways when cropping a webpage by id/class.
Membership: View: Authorized Senders
The, Membership: View: Authorized Senders screen now has descriptive text on just what the sublist is.
If the option to send out messages without needing moderation is enabled in Bridge, that is also mentioned and described.
The Bounce Handler email address is listed in the, Mailing List: List Information screen
This is to make it easier to understand how to set up the Bounce Handler correctly to process bounced messages.
Send a Webpage: Content via a URL: no feedback/error thrown if problems were found with the crop
List Consents can be blank
"available_lists()" SQL query just isn't specific enough to find the actual lists available
Send a Webpage errors should be shown in Send a Message screen (or at least in error log)
Incorrect Profile Login asks if you are registered, even if "Registering" is disabled.
"Already Subscribed" email notification does not show subscriber email correctly
Plugin: Tracker: Hard Bounce report sometimes not shown
This is mostly a bug-fix release for issues found in the v11.4.3 release of Dada Mail.
Make FastCGI/PSGI setup "Experimental" so to give people pause before using it #823
MySQL Schema, default TIMESTAMP set to, '0000-00-00 00:00:00' in dada_message_drafts
Link to view archived message in browser broken in preview/test mass mailing messages #820
This is mostly a bug-fix release for issues found in the v11.4.2 release of Dada Mail.
Yikes! App/Server Problem! page returns the wrong HTTP response code 200 instead of 500 #817
"Hide Administration Link" Option always reverted to showing in install/configure #818
Adding random query strings to some resources to get past caching #821
This is mostly a bug-fix release for issues found in the v11.4.1 release of Dada Mail.
Plugins: Bridge: saving settings will delete POP3 Discussion Password
This is mostly a bug-fix release for issues found in the v11.4.0 release of Dada Mail.
Broken Image shown if Logo Image URL set incorrectly #814
"mailing_list_message-none.html" is shipped with styling (no styling should be present) #10
This release has changes mostly that relate to the Tracker plugin:
Support to add a Google Maps API Key has been added
Ability to log full (rather than anonymized) IP addresses has been restored
Google Maps API Key support
On June 1st, Google will require anyone that accesses their maps API to get an API Key (and thus, sign up for Google Cloud Platform). Dada Mail uses the map charts to show location data, and this falls under using their maps. Rather than remove this feature from Dada Mail, we've instead added support to add this Maps API Key into Dada Mail.
You can grab an API key using these instructions:
Once you have a key, you may add it to Dada Mail through the Dada Mail Installer - look for a checkbox labeled,
Configure Google Maps
Check it, then add your Google Maps API Key in the textbox labeled,
Google Maps API Key
If this API Key is not available, none of the map charts will be shown, but tabular data will be available where that makes sense. You can also disable showing maps in the Tracker plugin with a new option labeled,
Show maps in message reports
Configure Handling Personally Identifiable Information (PII)
Dada Mail now has the ability - install-wide to control just what personally identifying information is allowed to be collected. New options are available in the installer under the option,
Configure Handling Personally Identifiable Information (PII)
Allow email addresses to be logged for tracking/analytical purposes
If enabled, Dada Mail will then enable an option in the Tracker plugin labeled,
Track with email addresses
Which may be enabled/disabled per mailing list.
When this option is enabled, the Tracker plugin will log and report data that includes the email address.
If disabled, the following message will be shown in the Tracker plugin,
Disabled. Logging email addresses for analytical purposes is not enabled.
Log complete/anonymized IP addresses
Dada Mail by default anonymizes IP addresses before logging them. If you would like to enable saving the actual IP address being reported, you now have the option to do so.
Make sure to be educated on these options - if you need to follow the guidelines put forth by the GDPR, neither tracking with an email address, nor logging IP addresses should be things you should be doing, unless you've been given consent to do so. See also
IP addresses and the Tracker plugin
One of the places that full IP addresses are useful, is when reporting where opens, clickthroughs, etc are done geographically, and Dada Mail reports this using it's map charts.
If IP address logging is anonymized, this location lookup by IP address is negatively impacted.
This is now noted in the Tracker plugin, and a new option is available to simple enable/disable maps from being shown completely. Look for the option labeled,
Show location data in message reports
These topics are touched upon in then following blog post:
Tracker: "Unique" Opens/Clickthroughs, etc aren't calculated correctly, as Personally Identifying Information isn't collected since v11
This is mostly a bug-fix release for issues found in the v11.3.0 release of Dada Mail.
UI bug in Installer - Advanced Options bleeds out of div #810
Tracker: "Unique" Opens/Clickthroughs, etc aren't calculated correctly, as Personally Identifying Information isn't collected since v11
Google+ Support Dropped
Google+ has been effectively shuttered, so we've removed support for it from the app.
Enhanced One-Click Unsubscription support via Email Headers (per RFC 8058)
Dada Mail has supported "one-click unsubscribe" when a user clicsk one of the unsubscribe buttons/links in the mailing list message, as well as via the
List-Unsubscribe email header. The latter of which isn't shown directly to a subscriber, but may be used by their mail reader to provide a mechanism to unsubscribe through it's own UI.
There's a problem though with this
Sometimes the unsubscription link in the header is visted by anti-virus software which, after visiting the link will unsubscribe the user without any direct action from the subscriber themselves! This leads to all sort of administration problems, as list owners are losing subscribers who would like very much to stay on their mailing list.
Dada Mail now supports one-click unsubscribe via the
List-Unsubscribe header without this problem happening. This is done by following RFC 8058, which provides a mechanism to utilize one-click unsubscribe via the headers, but stops the scenario described above from happening.
Any email reader that supports RFC 8058 will allow your subscribers one-click unsubscribe. Any mail reader that doesn't support this mechanism will still be able to use the fallback, email-only option, also located in the mail header. Either way, incorrect unsubscriptions throught his mechanism shouldn't happen anymore. In our testing, we've found that most email readers actually only support emailing the list owner, when a user clicks the email reader-provided unsubscribe link.
Enhanced List-Unsubscribe header email-only option
If the above mechanism isn't supported by the mail reader, there's a good chance that the fallback is. That fallback being: the mail reader sends an actual email message to the list owner. This email message option has also now been made a bit more useful. In past versions of Dada Mail, an email would be sent to the list owner, telling them the address that wants to be removed as well as the list they should be removed from. It was up to the list owner to go through the list control panel to remove this address.
Starting with v11.3.1, the unsubscription link itself needed to unsubscribe the address from the list will be embedded within the email message the list owner receives, so all they have to do now is click that link.
List-Unsubscribe header can now be enabled/disabled
If one decides instead to not have the
List-Unsubscribe header available at all, there is a new option to not enable/disable it from being used. This option is available in the list control panel under,
Mass Mailing: Options: Headers: Use, "List-Unsubscribe" headers
New Options to Complete Unsubscriptions
To coincide with the enhancements to the
List-Unsubscribe header, we've expanded the options on what happens when a subscriber clicks the unsubscription buttons/links in mailing list messages themselves.
The three options are now:
Once a subscriber clicks on a unsubscription link/button in the mailing list message, they'll be unsubscribed right away, with no further action by the user. Super convenient for the subscriber! And one we suggest, especially since the enhancements to the
List-Unsubscribe header have been made and the problem with anti-virus software getting in the way have now been worked out.
One issue with this option though is that a user may inadvertantly click the unsubscription button/link, or forward the mailing list message to someone else, that then clicks that same button/link. Yikes!
Click a link/button in Dada Mail
Once a subscriber clicks on a unsubscription link/button in the mailing list message, they will be presented with a screen, that just asks them to click a link/button to complete the unsubscription. This method may help with people inadvertantly clicking the unsubscribe link/buttons in the mailing list message by mistake. It's the option selected by default. This option is also the newest option added.
Fill in the email address, the submit a form
Once a subscriber clicks on a unsubscription link/button in the mailing list message, they will be present with a screen with a form in it, that just asks them to fill in their email address to complete the unsubscription.
This option is a good one, if you're running a discussion mailing list where email messages are commonly replied to/forwarded to other members.
The unsubscription buttons/links embedded in the message may be clicked upon by a different user than the one that received the message, and this simple form can help stop unsubscriptoions done inadvertantly.
All these options work ndependently to the "one-click unsubscribe" support through the
List-Unsubsribe header, which doesn't requires (and cannot have!) any user intervention.
Bounce Handler Enhancements
IMAP Support Added
Set up the Bounce Handler to connect to your Bounce Handler Email address via IMAP. This additional option (along with original option of connecting via POP3) gives you more flexibility on how to connect to your Bounce Handler Email address to help fit more email hosting scenarios. For example, those who are using Microsoft Exchange to administrate email may find better success using IMAP, rather than POP3.
Option to select IMAP is available in the Dada Mail Installer.
IMAP support requires that you separately install the
Net::IMAP::Simple CPAN Perl module, or install/upgrade the
Bundle::DadaMail CPAN Perl Module.
Instagram Support Added
Add a link to your Instagram profile in your Mailing List Information, the link will be shown in your mailing list messages, along with Facebook, Twitter, Youtube, and your website links.
This is mostly a bug-fix release for issues found in the v11.2.8 release of Dada Mail.
Installation: Global Black List + Global Unsubscribe options do not get read or saved #805
Cloning list settings during list creation does not work #799
This is mostly a bug-fix release for issues found in the v11.2.7 release of Dada Mail.
RESTful API and saving list passwords not working correctly? #794
Sending: Options - saving SMTP settings that include a password fail when, "Save for Multiple Lists" is used #793
This is mostly a bug-fix release for issues found in the v11.2.6 release of Dada Mail. A few small changes and features did sneak in:
Show all profile fields in closed (invite only), private mailing list invitation subscription forms
By default, closed/private lists can still invite subscibers, but the subscription form does not show any profile fields. This option, found in: Membership: Options, will allow you to show those fields.
Number of Profile Fields shown in the admin menu
If you're wondering how many, or even if you have any profile fields, that information is now shown in the admin menu itself, saving you a click.
Log Viewer Plugin: order of logs in popup menu
The following logs will now always be shown first (if the log is available):
Bounce Handler Log
Then, any other log will be shown - most likely, "Mass Mailing" logs. These logs will stop NOT be in any useful order, but that issue will be addressed in a future release. This is currently an open issue:
Bridge: log does not report correctly when messages are *only* sent to list owner (and not to subscribers)
install.cgi does not generate usage text
Unsubscription Check does not normalize email case
Private Lists with "Request Removal" button not shown still have List-Unsubscribe present
This is mostly a bug-fix release for issues found in the v11.2.5 release of Dada Mail.
mailing_list_message-none.html should not have moustache template tags to render any HTML, it really should be, "none" #9
Mass Mailing: Options, "Convert CSS <style> blocks to inline styles in HTML messages " has no effect
This is mostly a bug-fix release for issues found in the v11.2.4 release of Dada Mail.
Send a Message: no error returned if HTML Version uses Send a Webpage, but URL is blank
Send a Message: Errors in constructing email message don't always show in, "Preview"
This is mostly a bug-fix release for issues found in the v11.2.3 release of Dada Mail.
Digest message draft information using wrong character encoding (not UTF-8)
Missing closing</form> tag in, dada/template/drafts.tmpl
Mass Mailing Digests Broken
This is mostly a bug-fix release for issues found in the v11.2.2 release of Dada Mail.
CKEditor drag and drop image upload broken
"Request Removal" link/buttons don't appear - wrong template var used
This is mostly a bug-fix release for issues found in the v11.2.1 release of Dada Mail.
Send a Message screen, "Send Test" will not pull up saved draft when screen refreshes
Set a default version (HTML, Plaintext) for mass mailing authoring
Sometimes, you want to send only PlainText mass mailings.
This new feature makes this much easier to configure. In v11.2.1 (and above), go to:
Mass Mailing: Options
Default to authoring:
Doing so will:
select, "PlainText Version" tab by default, instea of "HTML Version""
select, "Write/Paste Text by default" in the PlainText Version tab
select, "Do not send an HTML version (only PlainText version)" in the HTML Version tab
Profile email update creates 500 error
"HTML Version", "PlainText Version" options can lose their stickiness
Custom Subject not added to new draft messages
Email Addresses can be subscribed twice if cased differently
Drafts/Send a Message UI redesign/shuffle
The Send a Message part of the app has been given a healthy UI refresh - some things to look for:
Prompt before leaving screen
If you try to leave a draft message screen without saving your changes, you'll be reminded of this with a prompt. This should help stop you from inadvertently leaving the screen prematurely.
Default screen: All Drafts/Stationery/Schedules
When you log into your mailing list's list control panel, the default screen is now the All Drafts/Stationery/Schedules screen, rather than the Send a Message screen. This is to make loading of the list control panel go a little faster, since the Send a Message screen is very complex, and takes a while to fully load.
Send a Webpage screen removed (but all features moved to Send a Message)
Having two screens that can send a mass mailing seems like one too many, so we've removed the Send a Webpage screen. Don't worry - all the features on that screen have been added to the Send a Message screen, so no features have been removed. What has been removed is a lot of duplicate code in the backend. Getting rid of this code makes things just that much more simplier to keep well-maintained.
A mass mailing message can be created by:
Writing or pasting content into the rich text editor
fetching the message from a specific URL
creating the message from a RSS/Atom feed
from the Send a Message screen
"All Drafts/Stationery/Schedules" screen changes
Individual Drafts/Stationery/Schedules now how a button to Preview the message, without having to open them individually for editing.
All messages are now sorted by creation date, rather than last-modified date, and this creation date is shown.
Mass Mailing Top Menu Changes
Send a Message has been renamed + New Draft Message. Clicking it will always create a new draft message. In previous versions of Dada Mail, any previous draft message would get loaded. This was problematic, if you had more than one draft message - things got confusing on just what draft message was now loaded. This menu item has moved one item below in the top menu bar of Mass Mailing
Drafts/Stationery/Schedules has been renamed, All Drafts/Stationery/Schedules and has been moved to the top of the Mass Mailing top bar menu. As has been mentioned, this is the defalt screen now when you log into your mailing list's list control panel.
New Option: Save Sent Draft Messages as Stationery
Many times, people would like to re-use a previously sent message for a new mass mailing. Now, Dada Mail has an option to save previously sent messages you've authored in the list control panel as new stationery messarges, which you can then use to create a new draft message from.
New Ignore Bounces Sublist
Some users have reported problems with addresses they know are valid, but which that bounce anyways: there's a (hopefully) temporary problem on the receiving mail server.
To counter this, Dada Mail now allows you to set up a list of addresses that the Bounce Handler will not process as it does usually. Instead, bounces from the addresses will just be ignored.
Addresses can be added simonilar to the Black List and White List: segments of addresses are allowed.
For example, if you want to ignore a specific email address, you can. If you want to ignore all address from a domain, you can do that as well.
RESTful API Support for Update Profile Fields
The RESTful API now supports updating profile fields (look for,
update_profile_fields in the API docs) for an individual email address at a time.
Template Tag Syntax Error Check Not Working in, Mass Mailing: Send a Message/Send a Webpage
Custom Mass Mailing Layouts Have Email Themes CSS Embedded
Invitation Only Lists cannot have invited users subscribe
Multiple Subscribe option inside Plugins menu throws syntax error.
Custom "from_phrase" and "subject" set in email theme templates not used with Full Layout
Many pieces of plain text copy in Dada Mail are now treated as Markdown markup, and will be treated as such if/when the copy is used as HTML.
List Settings that will get this treatment include:
Mailing List Description
Mailing List Physical Address
Along with these list settings, mass mailing messages that are authored in plaintext will be treated as Markdown markup if they are converted to HTML.
Mass Mailing Broken - errors about missing, "To" header #744
This bug, unfortunately, will affect ALL users of at least version 11.0.5 of Dada Mail. If you are using that version, it's recommended to upgrade.
Bridge: Mass Mailings do not work: "Argument contains empty host portion of address at" error #745
Similar story on this bug.
Upgrading via CLI does not set up WYSIWYG editors/file manager correctly #743
List Invitations do not work #740
This most likely affect v11.0.2 users, as changes in that ver. touched on the code where this bug was introduced.
Resending subscription confirmation requests will fail if there are list consents #741
Custom Preheader is not set for Subscription Confirmation Message (and probably others) #736
UTF-8 characters in email headers of email templates cause server errors #735
Custom To/From phrases as well as Custom Subject do not get applied correctly #721
Digests not working in v11.0.0 #732
"Website URL" and, "Backlink URL" use same list setting key name #731
Unfortunately, I had to choose one setting to work with one feature, and make the other setting use a different key.
I've chosen to have the "backlink" URL and Nmae to use different keys.
Imported Addresses w/Profile Fields show incorrectly decoded UTF-8 characters #730
"Form Fields" listing lacks List Consents #727
"Minimal Subscription Form" HTML code lacks List Consents #726
Major Changes: GDPR Compliance
This version has been released almost exclusively to help users/administrators of Dada Mail to more easily comply with the GDPR. More information about what has changed can be found in the included GDRP Guide for Dada Mail